Winter offer: 25% off pressure washing & render cleaning · Ends 28 Feb · Free quote back in 30 minutes Get my quote →
Fully insured · Leeds & West Yorkshire

Patio Care · 2026-10

Black Spot on Your Patio: Why Lichen Comes Back

The dark spots on Indian sandstone that survive every jet wash are lichen, and it is rooted in the stone. Here is what removes it, what makes it worse, and how to keep it off.

Get your free quote. We reply fast.

No obligation. We use your details to reply to your enquiry. If you add your email, we may also send you occasional offers, and you can unsubscribe at any time. See our privacy policy.

Quick Answer

The black spots on your patio are lichen, not dirt, and they are rooted into the pores of the stone. Pressure washing alone will not remove them and often makes them worse. The method that works is a sodium hypochlorite based cleaner applied to a dry patio, left to work for the time on the label, then rinsed at low pressure. Stubborn areas take a second application. After that, the job is keeping the patio dry enough that the lichen cannot re-establish.

What Black Spot Actually Is

Black spot lichen is two organisms living together: a fungus that provides the structure and an alga that feeds it. The fungus sends fine root-like threads into the surface of the stone, which is why a colony that looks like a small dark circle on top is anchored a millimetre or two down. Sandstone, with its open pores and riven face, is ideal for it. Concrete flags and limestone get it too. Porcelain and tightly sealed surfaces rarely do.

The spots start as pinpricks, usually on the north facing or shaded side of the patio, under a hedge or near a downpipe. Left alone they spread outward in rings and merge, until a patio that was buff or cream three summers ago looks grey from the kitchen window. In Leeds the worst of it is on patios laid between about 2005 and 2015 when riven Indian sandstone was the default choice, and on anything under mature trees in Roundhay, Alwoodley, Horsforth and Adel.

Why the Jet Wash Does Not Work

This is the bit most people learn the hard way. A hired pressure washer blasts off the visible top of the lichen and the patio looks better for a weekend. The roots stay in the stone. Within a few weeks they regrow, and because the pressure has opened up the surface of the sandstone, the new colony has more pore space to get into. Two or three rounds of this and the patio is rougher, holds more water and has more black spot than when you started.

It also strips the pointing. Sand and cement joints on an older patio do not survive repeated close range washing, and once the joints go, water sits in them and the lichen spreads along every line.

The Method That Removes It

1. Start with a dry patio

Treatment has to reach the lichen, not sit on top of a film of water. Pick a dry spell with no rain forecast for 24 hours. Sweep off leaves and loose debris.

2. Apply a hypochlorite based patio cleaner

The products that work on black spot are sodium hypochlorite based. They are sold as patio black spot removers and as some brands of outdoor cleaner. Apply with a watering can or a low pressure sprayer, wet the whole patio rather than just the spots, and keep it off lawns and planting. Follow the dwell time on the label. On heavy growth you will see the spots turn pale within an hour.

3. Rinse at low pressure

Rinse with a garden hose or a pressure washer on a wide fan nozzle held well back from the surface. The point is to wash the dead lichen and the cleaner away, not to blast the stone. If the joints are sand, keep the lance moving and do not chase the lines.

4. Repeat on anything that is left

Long established colonies on sandstone often need a second treatment a week later. That is normal and it is not a sign the product failed. What is left after the second round is usually staining in the stone rather than live lichen, and it fades over a few months of weather.

5. Re-point and re-sand where needed

Once the patio is clean and dry, sort any joints that have gone. Open joints are where the next colony starts.

What Not to Use

  • Acid based cleaners on sandstone or limestone. They etch the stone, leave it lighter and rougher, and make the black spot problem worse next year.
  • Neat bleach from the kitchen. It is the right chemistry at the wrong concentration and it runs off into everything around it.
  • Wire brushes and turbo nozzles. Both scar sandstone permanently.
  • Sealing a patio that still has lichen in it. You seal the problem in and it grows under the coating, which then peels.

Stopping It Coming Back

Lichen needs a damp surface. Everything that keeps the patio drier reduces it. Cut back the hedge or the tree branches that shade it. Clear leaves in autumn rather than in spring. If water puddles in one corner after rain, that corner will always be the first to go black, so look at the fall or add a channel drain.

A maintenance treatment each spring, at a lighter rate than the removal treatment, keeps a clean patio clean. Alternatively, once the stone is fully clean and has had a couple of dry weeks, a breathable impregnating sealer slows water getting into the pores. Do not use a film forming sealer on riven sandstone.

When to Get Someone In

A patch of black spot on a small patio is a reasonable DIY job. Where it stops being one: a large patio with several years of growth, sandstone that has already been damaged by pressure washing, limestone, or any patio where the pointing is failing. We treat and clean patios across Leeds and West Yorkshire with the right product for the stone, at the right pressure, and we re-sand or re-point as part of the visit. See our patio cleaning in Leeds page for what the service covers.

Black Spot on Sandstone? Send Us a Photo

A photo of the patio and a rough size is usually enough for us to say whether it is a one-visit or a two-visit job and give you a fixed price. Free site survey across Leeds and West Yorkshire.

Get a Patio Quote

Frequently Asked Questions

What are the black spots on my patio?

Lichen. It is a fungus and an alga growing together, and it roots into the pores of the stone rather than sitting on the surface. That is why it survives a jet wash and why it comes back in the same place.

Will a pressure washer remove black spot from a patio?

On its own, no. Pressure lifts the surface part of the lichen and leaves the roots in the stone. Within a few months the spots are back, usually darker, and on sandstone the pressure has also opened up the surface so the next colony gets in faster.

What kills black lichen on Indian sandstone?

A sodium hypochlorite based patio cleaner applied to a dry patio and left to work, then rinsed at low pressure. On stubborn areas a second application is normal. Acid based cleaners should be kept off sandstone and limestone because they etch the stone.

Is black spot worse on Indian sandstone?

Yes. Sandstone is porous and the riven surface holds water, which is exactly what lichen wants. Porcelain and sealed concrete get it far less. Limestone gets it and is also easily damaged by the wrong cleaner, so it needs more care.

How do I stop black spot coming back?

Keep the patio drying out: cut back overhanging planting, clear leaf litter, sort any puddling. Then either a maintenance treatment each spring or a breathable sealer once the patio is properly clean and dry.

How much does professional black spot removal cost in Leeds?

It depends on the size of the patio and how established the lichen is. Every job is quoted after a look at the stone, and heavy black spot on sandstone can need a second visit. The quote is fixed before we start.